Angelo Po 0N0TPG Bedienungshandbuch Seite 30

ENGLISH
Even if the equipment has all its safety devices, if
necessary, during the installation and connection
other safety devices may be supplemented in ac-
cordance with applicable laws.
The illustration shows the position of the de-
vices.
Gas supply tap: for turning the connection
A)
to the gas supply line on and off .
Safety thermocouple: cuts out the gas sup-
B)
ply if the fl ame goes out.
WARNING: Make a daily check that
the safety devices are properly installed
and in good working order.
The illustration shows the position of the
signs provided.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING draws the attention on
E)
compliance with the rules. "The Manufac-
turer declines all liability in case of failure to
comply with the installation and commis-
sioning instructions".
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
B
A
E
D
F
37M3202
C B
WARNING: watch out for hot sur-
F)
faces.
CE Marking: it indicates that the equipment
G)
is compliant with all relevant laws applicable
to the product.
SAFETY
G
A
3320091_ut_GB