Manufacturer And Appliance Nameplates; Procedure For Requesting Service - Angelo Po 0N0TPG Bedienungshandbuch

GENERAL INFORMATION

MANUFACTURER AND APPLIANCE NAMEPLATES

The nameplates shown here are fi tted directly
to the appliance.
One (fi g.1) contains references and all essential
information for operating safety, and the other
(fi g.2) provides gas information for each coun-
try of use.
A) Appliance model
B) Type of customisation
C) Manufacturer's nameplate
D) Type of fume exhaust vent
E) Serial number
F) Protection rating
G)
CE marking of conformity
H)
Reference standard
For all requirements contact the agents or the
headquarters of Angelo Po which can be found
in the contacts section of the website http://
www.angelopo.com.
3320091_inst_GB

PROCEDURE FOR REQUESTING SERVICE

L) CE marking
M) Product family type
N) Gas pressure
P)
Appliance category
Q)
Gas consumption
R)
Rated power (kW)
S)
Gas type
U)
Code of country of destination
V)
Date of construction
W) Voltage (V)
X) Frequency (Hz)
Y) Rated power (kW)
Z) Injector diameter
When requesting service, state the data pro-
vide on the nameplate and provide a descrip-
tion of the fault.
ENGLISH
5