Angelo Po 0N0TPG Bedienungshandbuch Seite 34

ENGLISH
Hazard
Risk of electric
shock caused by
live components
Risk of electric
shock caused by
live parts
HAZARDS AND SAFETY PROVISIONS DURING USE
When using the appliance, watch out for the following hazards and provide for the countermea-
sures indicated below:
► Source of hazard: heat
Hazard
Flammable mate-
rial placed on the
evacuation area
Contact with hot
working surfaces
Scalding caused
by hot liquids
8
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Where or in which situations
does the hazard occur?
In case of blocked fl ue
Accidental contact
Handling pans
Countermeasures
• Disable the power supply
before removing the pro-
tections
• Prevent the appliance from
being powered acciden-
tally.
• Ensure that there is no voltage
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with the specifi cations indi-
cated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance commis-
sioning, check that electri-
cal connections are secure-
ly fi xed
• Before commissioning,
make sure that the appli-
ance and its metal acces-
sories are connected to a
system for equipotential
bonding
Countermeasures
• Training of personnel
• Training of personnel
and warning plate in
place on the appliance
and in the user manual
• Training of personnel
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipoten-
tial bonding
system
Safety device
None
None
PPE as required
by the applica-
ble laws in the
country of use.
3320091_ut_GB