Vicon MH 180S Betriebsanleitung Seite 69

Maize chopper, types MH 180S(Quattro) and MH 180SU, PSN: see back of this manual
to which this certificate relates conforms to the basic safety and health requirements of the Directives
89/392/EEC, 91/368/EEC, 93/44/EEC and 93/68/EEC
To effect correct application of the safety and health requirements stated in the EEC Directives, the
following standard(s) and /or technical specification(s) has (have) been respected:
Geldrop, 28-05-1999
--------------------------------------------------------------------------------------------------------------------
The maize chopper you have purchased is the result of many years of costly development and extensive
field testing, providing a huge capacity requiring relatively little power.
It is a first class engineering product backed by a widespread distribution/dealer organisation to give you an
efficient after sales service.
This machine shall be exclusively used for the normal agricultural work as described in chapter I. "Destina-
tion and intended use" below.
This manual has been prepared to enable you to obtain the best results from your machine under safe
working conditions, so please read it carefully before you start working and make sure you follow the in-
structions when working. In this context we would draw your special attention to chapters III. and XIV.
Note: You will find most illustrations of this operation manual on the fold-out page at the very end (see
table of figures (page EN1(3) for exact locations); the safety decals are shown and explained in
chapter XIX (page EN24).
Please retain this manual for reference.
--------------------------------------------------------------------------------------------------------------------
'KVERNELAND GELDROP B.V.' manufacturers of farm machinery reserve the right to change design
and/or specifications without notice. This does not include an obligation to make changes to machines pre-
viously supplied.
--------------------------------------------------------------------------------------------------------------------
I. DESTINATION AND INTENDED USE OF MAIZE CHOPPERS
This machine is exclusively appropriate-designed for cutting and chopping plants, mainly maize (corn), but
other stem plants (such as Sudan grass and sunflowers) as well, taking into account all prescriptions,
procedures, etc. as stated herein.
This machine shall be exclusively used for the normal agricultural work.
Attention: Any use beyond the one stipulated above requires written authorization of the
manufacturer; refer also to the reliability and warranty chapter in this manual. In
case of doubt: ask the manufacturer!
G9905NT3
EC CERTIFICATE OF CONFORMITY
conforming to EEC Directive 89/392
We Kverneland Geldrop B.V.
Nuenenseweg 165
NL-5667KP Geldrop
declare in sole responsibility, that the product
EN292-2, EN294 and prEN632
INTRODUCTION
EN2
.
(Febr. 1992)
. . . . . . . . . . . . . . . . .
Casper Böhme
General Manager