Filling The Well - Wellsystem Relax Montageanweisung

Assembly
10/2017
6.7

Filling the well

The well must be vented approximately 3 days after filling (see the operating
instructions for this device).
– Connect up the water hose and open the water shut-off valve.
WARNING!
Equipment damage can be caused through using the
wrong filling quantity!
– Take note of the maximum filling quantity.
– Close the water shut-off valve and disconnect the water hose.
– Attach the remaining 4 supports.
– Retighten the screws.
Tool: Ratchet-wrench with 10 mm hexagonal socket wrench or 10 mm open-
ended wrench
Installation instructions 43/68