Starting With A Coin Device; Ending The Massage; Interrupting The Massage; Ending The Massage Before The Time Has Expired - Wellsystem RELAX Gebrauchsanweisung

Operation
22/44
All manuals and user guides at all-guides.com
– Setting the massage time – see page 28.
– Insert the chip card.
– Lie down on the unit. In doing so place your head on the positioned head-
rest.
– Press the START / STOP button.
The program stored on the chip card will run automatically.
Chip card inserted incorrectly
If the chip card is inserted incorrectly, the error message Err is shown on the
display.
4.3.2

Starting with a coin device

– Set the massage time on the coin device.
– Lie down on the unit. In doing so place your head on the positioned head-
rest.
– Select the massage area that you want or insert the chip card.
– Press the START / STOP button.
4.4

Ending the massage

The massage will be terminated automatically after the set massage time has
expired. A flashing StOP sign will be shown in the display.
When the set massage time has expired, the nozzles move to the foot end
and then to the starting position at the head end. In doing this, the pressure is
reduced.
4.4.1

Interrupting the massage

– Press the START / STOP button.
The nozzle carriage moves to the head or foot end of the unit.
Do not get off the massage device until the nozzle carriage has reached
one of the end positions. The massage time will keep running.
– Press the START / STOP button once again to restart the massage.
4.4.2 Ending the massage before the time has
expired
– Press the START / STOP button and keep it pressed down for 3 se-
conds:
The nozzle carriage will move up to the head end of the device and it will
then be switched off.