Water/Cooling Conditions; Coin Devices - Wellsystem Relax Montageanweisung

Technical data
10/2017
7.7

Water/cooling conditions

The massage unit must be filled with normal mains water without additives.
The water can be drained off into the public drainage system after use.
Permissible water pressure
(water inlet):
Maximum coolant
temperature:
The device may only be operated with the high-pressure hoses included in
the scope of delivery.
7.8

Coin devices

You can obtain information regarding the coin devices from the customer
service department – see page 2.
0.8 MPa (8 bar)
16 °C > setpoint
temperature and set time.
Installation instructions 59/68