Installing And Connecting Up The Pump - Wellsystem Relax Montageanweisung

Assembly
10/2017
– Fit the hose and tighten the hose clip.
Tool: Ratchet-wrench with 8 mm hexagonal socket wrench or 8 mm open-
ended wrench
6.3

Installing and connecting up the pump

– Fit the pump.
– Fit the 2 x screws (M6 x 20), spring rings and washers and then tighten
up.
– Fit the hoses and tighten the hose clips with 10 Nm.
Tool: Ratchet wrench with 8 mm hexagonal socket wrench,
4 mm Allen key and torque wrench (15720612)
Installation instructions 33/68