Disassembly
5
Disassembly
10/2017
This section describes the steps for disassembly in detail.
DANGER!
Electricity throughout the entire device!
Assembly and connection to the mains electrical supply
must comply with the national regulations.
wellsystem MEDICAL / MEDICAL_PLUS:
Disconnect the sunbed from the power supply when
performing maintenance work requiring opening of the
device.
wellsystem RELAX / RELAX _PLUS:
Before beginning work, pull out the mains plug or
disconnect all live lines.
Assembly, installation, upgrading or servicing the
equipment is only to be carried out by personnel
specially trained by JK-Global Service.
5.1
Removing the panels and the frame
–
Remove the packing.
–
Release the front panel from the holder.
Tool: No. 2 Philips screwdriver
–
Remove the control panel, handle, headrest pad and hoses
and place to one side.
*
2 pressure hoses (90906-.. and 50909-..)
*
from the unit
Installation instructions 17/68