Check Whether The Nozzle Carriages Move Smoothly - Wellsystem MEDWAVE Montageanweisung

50/90 1020049-00E
6.6 Check whether the nozzle carriages
move smoothly
– Unscrew the screws.
– Tool: Ratchet-wrench with 10 mm hexagonal socket wrench
– Check whether the nozzle carriage moves smoothly. Move the nozzle
carriage back and forth.
If the nozzle carriage moves back and forth without any problems, proceed
with assembly, see Assembly on page 54. If the nozzle carriage moves with
difficulty then perform the following steps.
Assembly
12/2021