Fitting The Control Box - Wellsystem MEDWAVE Montageanweisung

Assembly
12/2021
6.4

Fitting the control box

– Hook the control box on the upper screws (1).
– Tighten the screws (2).
– Fit the centre screw (4.2 x 9.5) (3) and tighten up.
Tool: No. 2 Philips screwdriver or battery-powered screwdriver with PHZ-bit 2,
ratchet wrench with T20 Torx® bits
– Push the cables (1) through the openings in the control box.
– Insert plugs (2) X01-1, X02-1 and X03-1.
Installation instructions 47/90