Sharp VC-M23SM Servicehandbuch Seite 9

4. ADJUSTMENT, REPLACEMENT AND ASSEMBLY OF MECHANICAL UNITS
Here we will describe a relatively simple service work in the field, | V® are sure that the easy-to-handle tools listed below would be
not referring to the more complicated repairs which would require Nore than handy for periodical maintenance to keep the machine
the use of special equipment and tools (drum assembly replace-_!" Its original working condition.
ment, for example).
TOOLS NECESSARY FOR ADJUSTING THE MECHANICAL UNITS
The following tools are required for proper service and satisfactory repair.
ee ee
Reel Disk Height Adjusting Jig} JiGRHOO02 jar
Masier Plane Jig JiGMPO001
Torque Gauge (90g) JIGTGOOSO
2
4
§
-
2
Torque Gauge (1.2kg
Gauge Head
Cassette Torque Meter
Alignment Tape (PAL)
Tension Gauge Adapter
Specia! Bladed Serewdriver
JIGTG1200
JIGTHOO06
JIGVHT-063
JIGCGO300
JiGSG2000
JIGHWO009
JIGHWO0T5
VROCPSV
JIGADPO03
JiGDRIVERH-4
CM
CN
AW
CZ
BF
BS
AE
AE
CK
BK
AP
rm,
Ha
lap!
Remarks
These Jigs are used for checking and
adjusting the reel disk height.
These Jigs are used for checking and
adjusting the torque of take-up and sup-
ply reel disks.
This cassette torque meter is used for
checking and adjusting the torque of
take-up for measuring tape back ten-
sion.
There are two gauges used for the ten-
sion measurements, 300 g and 2.0kg.
These Jigs are used for loosening or
tightening special hexagon type screws.
These tapes are especially used for
electrical fine adjustment.
This Jig is used with the tension gauge.
Rotary transformer clearance adjusting
jig.
This screwdriver is used for adjusting
the guide rotler height.