Sicam FALCO EVO 628 S V8 Originalbetriebsanleitung Seite 68

en 68 | FALCO EVO 628 S (IT) V8 | Preventive maintenance
6. Preventive maintenance
6.1 Recommended lubricants
component Lubricant
Gear unit Lubricating oil
Lubricating oil
Compressed air system Lubricating oil
Lubricating oil
Tab. 10: Lubricant table
!
The manufacturer does not accept any liability for
damage arising from the use of lubricants with
properties differing from those specified (in the
standard).
6.2 Cleaning and maintenance
DANGER - Risk of electric shock from live
parts
Risk of electric shock from contact with
electrical components.
¶
Before performing cleaning and
maintenance work, always switch off the
FALCO EVO 628 S (IT) V8 by means of the
on/off switch.
¶
Disconnect mains plug.
DANGER - Risk of crushing by pressurized
components
Risk of crushing by sudden movements of
pressurized components.
¶
Always disconnect the
FALCO EVO 628 S (IT) V8 from the
compressed air supply before performing
any cleaning and maintenance work.
!
In order to guarantee the performance and trouble-
free operation of the FALCO EVO 628 S (IT) V8,
it is essential to clean and maintain the
FALCO EVO 628 S (IT) V8 on a regular basis.
i
Maintenance must be performed by the operator
on the basis of the manufacturer's specifications as
outlined below.
|
1 695 109 039 2019-02-20
6.2.1
The illustration shows the areas where cleaning is
required to ensure maximum performance of the
FALCO EVO 628 S (IT) V8.
Standard
ISO 460
DIN 51502-CLP
ISO 34-98-CC
ISO VG 32
B
C
Fig. 58:
Area
A
B
C
D
Tab. 11:
Cleaning intervals
A
Machine cleaning areas
Cleaning method
Use cleaning agents
and lubricating spray.
Clean with a cloth and check the
condition of the protective equipment
Use cleaning agents
and lubricating spray.
Check the condition of the rubber
guard (wear, contamination)
Cleaning intervals
D
x
x
x
x
SICAM srl soc. Unip