Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
58 | FALCO EVO 628 S (IT) V8 | Application
!
To avoid possible danger, the bead-breaker arm
should be grabbed in the area shown in the figure.
8
15
1
2
1
Fig. 34:
Setting the adjusting pin with 2 positions
Position
L1 (mm)
1
135
2
60
Tab. 8:
2 positions
2. Set the angle of the bead-breaker blade to suit the
tire diameter.
Fig. 35:
Adjusting the bead-breaker blade
|
1 695 109 039
2019-02-20
4
11
2
652161-30_BM
L2 (mm)
398
293
3. Place the tire on the ground next to the plastic
supports for the unseating unit.
Warning - Risk of injury from trapping hands
between rim-chuck plate and tire.
As the tire moves, make sure that your hands
do not become trapped between the tire and
rim-chuck plate.
¶
Before starting, turn the clamping plate in
such a manner that the clamping jaws are
at an angle of 45° to the machine housing.
¶
As an additional safety measure, move the
clamp claws into the smallest position
within the rim-chuck plate.
Fig. 36:
Position of the rim-chuck plate
4. Activate the pedal for the unseating unit to move the
bead-breaker blade towards the tire bead.
Fig. 37:
Unseating the upper bead by actuating hand lever
652167-12_BM
SICAM srl soc. Unip
Werbung
