Sicam FALCO EVO 628 S V8 Originalbetriebsanleitung Seite 61

i
If the rim must be clamped on the inside, the rim-
chuck claws must be moved inwards.
652158-10_BM
Fig. 43: Clamping from inside
5. Apply lubricant to the tire wall up to the rim edge.
i
For runflat or UHP (ultra high performance) tires:
Use tools such as pliers, wedges or bead depressor
Tecnoroller NG.
6. Press the pedal for the tilting mounting column to
move the mounting column into working position.
7. Operate the pedal for the rotation of the clamping
device to align the wheel in such a way that the tire
valve / TPMS is positioned opposite the mounting
head as shown in the illustration.
12:00
2 1
9:00
6:00
Fig. 44: Position of the tire valve in relation to the mounting head
1 Assembly tool
2 Tire valve / TPMS
8. With the locking lever, position the assembly tool on
the rim edge.
SICAM srl soc. Unip
3:00
Application | FALCO EVO 628 S (IT) V8 | 61
i
When you press the locking knob, the distance
of the assembly tool from the rib edge and
the mounting arm is simultaneously adjusted
horizontally and vertically.
3 mm
2 mm
652147-24_Im
Fig. 45: Use
9. Turn the clamping plate clockwise and lower
the bead lifter with the joystick.
652172-19_BM
Fig. 46: Use
en
|
2019-02-20 1 695 109 039