en
62 | FALCO EVO 628 S (IT) V8 | Application
10. With the bead lifter, insert the first tire bead.
i
If needed, especially with low cross-section tires,
use the helper Tecnoroller NG to create installation
space for the tool.
Fig. 47:
Applying the helper
11. Lift the bead lifter with the joystick, and place the
first tire bead on the assembly tool.
652172-20_BM
Fig. 48:
Use
|
1 695 109 039
2019-02-20
12. Press the pedal to rotate the rim-chuck plate
clockwise until the tire bead is completely unseated
from the rim seat.
Fig. 49:
Remove the top tire bead
Warning: Danger of injury to the lower
extremities while the rim-chuck plate is
turning.
Danger of injury to the lower extremities due
to projecting parts under the rim-chuck plate.
¶
Always maintain a safe distance to the rim-
chuck plate.
¶
Always check to ensure the faultless status
of the plastic covers.
¶
Never remove the plastic covers. This
could be dangerous.
Fig. 50:
Plastic cover
SICAM srl soc. Unip