Sicam FALCO EVO 628 S V8 Originalbetriebsanleitung Seite 63

i
In the case of tubed tires, pull out the tube by
pressing on the pedal to fold over the tilting
mounting column.
13. Lift the tire, lower the bead lifter with the joystick,
and insert the top tire bead.
i
If needed, especially with low cross-section tires,
use the main roller Tecnoroller NG to facilitate
lifting.
Fig. 51: Unseat the lower tire bead.
14. Lift the bead lifter with the joystick, and place the
second tire bead on the assembly tool.
15. With the helper in place, turn the rim-chuck
plate clockwise until the second bead is fully
detached.
Fig. 52: Removal
SICAM srl soc. Unip
Application | FALCO EVO 628 S (IT) V8 | 63
16. Remove the tire by pressing on the pedal to fold
over the tilting mounting column.
17. Remove the tire valve / TPMS valve if it has to be
replaced.
i
Follow the instructions of the manufacturer of the
tire valve / TPMS valve for mounting on / removing
from the rim.
!
SICAM srl soc. Unip is not liable for functional faults
arising from incorrectly mounting or removing the
tire valve / TPMS valve or defects of that valve.
en
|
2019-02-20 1 695 109 039