Sicam FALCO EVO 628 S V8 Originalbetriebsanleitung Seite 41

1. Symbols used
1.1 In the documentation
1.1.1 Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the
consequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
SICAM srl soc. Unip
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | FALCO EVO 628 S (IT) V8 | 41
1.2 On the product
!
Observe all warning notices on products and ensure
they remain legible.
Warning Position on the product
symbol Nature of danger / Work instructions
The position of the warning symbol on the product is to
guarantee perfect readability.
The warnings on the machine can divided into notes
on residual risks (yellow/black triangle) and additional
work instructions.
Back of machine
The following information can be found here:
Machine model, 10-digit ID number, voltage (V),
frequency (Hz), connected load (kW), amperage (A),
max. supply pressure (kPa), degree of protection (IP),
year of manufacture, CE mark, EAC identifier, serial
number of the machine, barcode.
Back of the machine
¶
Indication of the operating voltage.
¶
Heed the information on the rating plate.
¶
The plate shown above is an example only; the
voltage listed here depends on the electrical version
of the machine.
en
|
2019-02-20 1 695 109 039