Axonics 2501 Handbuch Seite 68

Hibernate the Neurostimulator
The Neurostimulator can be put into Hibernate Mode if there
is a need to not deliver stimulation for a prolonged period of
time (e.g., months). For example, if a patient becomes pregnant
and needs to discontinue stimulation during the pregnancy,
put the device in Hibernate Mode. Hibernate Mode puts the
Neurostimulator in a power‐ conserving state to preserve the
battery of the Neurostimulator.
The patient does not need to periodically charge the
Neurostimulator when it is in Hibernate Mode.
Note: Make sure the Neurostimulator battery has a full charge when it is
1
put in Hibernate Mode. If the battery is not full, charge the Neurostimulator
before putting it in Hibernate Mode. This will ensure the battery is preserved
for long periods in Hibernate Mode.
How to put the Neurostimulator into Hibernate Mode:
Press the "Hibernate" button ( 1 ). A prompt will ask for
confirmation before putting the Neurostimulator into Hibernate
Mode. The Neurostimulator will automatically disconnect from
the CP and the CP will return to the Home screen when the
Neurostimulator is in Hibernate Mode.
Note: The CP and Patient Remote Control will not be able to communicate
with the Neurostimulator when it is in Hibernate Mode.
How to wake up the Neurostimulator from Hibernate Mode:
Place the Charger over the Neurostimulator to wake the device
from Hibernate Mode. The Charger may not provide the normal
feedback for aligning the Charger with the Neurostimulator, and
it may take several minutes for the Neurostimulator to wake
up. Check to see if the Neurostimulator is awake by trying to
connect with the CP or the paired Remote Control.
64