Axonics 2501 Handbuch Seite 37

Connecting to a Stimulator
The CP can connect to a patient's external Axonics Trial
Stimulator (Model 1601) or implanted Neurostimulator (Model
1101) to check the status of the device and program the device.
Connect to a Stimulator
There are two ways to access the CP screen that connects to a
1
Stimulator:
From the Home screen, press "Connect to Patient Device" ( 1 ).
After implanting a lead, press "Connect to Patient Device" on
the Define Thresholds or PNE Lead Placement screen.
33 33