Axonics 2501 Handbuch Seite 17

Summary of CP Buttons and Functions
4
3 5
3 4 5
2
6
7
8 9
6 7 8 9
10
The CP has two physical buttons:
1
1 Power Button – turns the CP on and off.
2 Stimulation Button – turns test stimulation on and off
(select screens only)
The CP has a Connector Panel with plugs for the cables
that are used with the CP. The symbols on the Connector
Panel indicate which cable should be used with each plug:
3 EMG Channel 1
4 EMG Ground
5 EMG Channel 2
6 Tined Lead Test Stimulation
7 Stimulation Ground
8 Foramen Needle or PNE Lead Test Stimulation
9 Power Input
USB port
10
The purposes and uses of these buttons and connections
are described throughout this manual
Note: EMG functionality ( 3 , 4 , 5 ) is not available in this model of
the Axonics Clinician Programmer.
Note: The USB port is disabled in all screens except, Reports List
Screen (see section Reports).
13 13