Axonics 2501 Handbuch Seite 61

Setting Up a New Neurostimulator
2
1
Entering Device Information
To edit one of the fields in the Device Info section:
Press the corresponding box.
•
A keyboard will pop‐up on the lower part of the screen ( 1 ).
•
Enter the desired information.
•
The Patient ID must be a minimum of 4 characters.
•
Note: When considering what patient ID to use, follow the applicable
guidelines from your organization regarding patient privacy.
The Remote Control ID must be the 10 character alpha‐
•
numeric serial number of the Remote Control being paired
to the Stimulator.
Press "Set ID" ( 2 ) to save the input ID (keyboard will
•
disappear).
57