Axonics 2501 Handbuch Seite 38

Connecting to a Stimulator
If the Connect screen is opened after implanting a PNE lead
(from the PNE Lead implant screen), the CP will automatically
2
1
search for the nearest Trial Stimulator ( 1 ).
If the Connect screen is opened after implanting a Tined lead
(from the Define Thresholds screen), the "IPG Scan" or "EPG
3
Scan" button ( 3 ) should be selected to initiate a search for
Neurostimulator or Trial Stimulator respectively.
A scrolling search icon will appear when the CP is searching for
Stimulators ( 2 ).
The CP will display the nearest patient device ( 4 ). Check the
Device ID and the Patient ID to determine if this is the correct
4
5
device. New devices will not have Patient IDs.
Press "Connect" ( 5 ) to connect to the displayed device. The CP
will display a prompt while it connects to and retrieves data from
the Stimulator ( 6 ). After successful connection to the device,
the CP will automatically open the Patient Device screen.
Additional devices can be displayed by the CP if the first device
7
found is not the targeted Stimulator. Press the down arrow
next to "Show Additional Devices" ( 7 ). This will display up to 3
8
additional devices found in proximity of the CP.
Note: Hold the CP within 1 meter (~ 3 feet) of the targeted device to find the
device. If the desired device is not found, move closer and search again by
( )
pressing "EPG Scan" or "IPG Scan" 8 .
6
34 34