Axonics 2501 Handbuch Seite 19

Logging-in to the Clinician Programmer
1
When the CP is turned on, it will
•
start-up at the Log-In screen.
By default, the "ADMIN" user
•
name will appear on the Log-In
screen ( 1 ).
Press "ADMIN" to log in using that
•
user name.
Press the down arrow to the
•
right of the user name to select
a different user name ( 2 ). There
will not be a down arrow if no
additional user names exist.
Note: The CP will automatically log‐out a user after 30 minutes of inactivity.
2
A short list of names will appear
•
when the down arrow is pressed.
Press a user name to select it to
•
log in ( 3 ).
More names can be accessed by
•
scrolling up and down the list using
the arrows on the right ( 4 ).
3 4
4
A key pad will appear when a user
•
name is selected.
Enter the 4‐digit passcode
•
associated with the selected user
name to log-in to the CP.
Press "Cancel" to switch user
•
names( 5 ).
5
15 15