Axonics 2501 Handbuch Seite 47

Viewing the Status of a Trial Stimulator
1
4
5
3
2
Active Therapy ( 3 ): This area shows the current stimulation
settings for the therapy programmed to the Stimulator.
For a Trial Stimulator, the active therapy program is indicated by
a colored box around the settings for that program.
Additionally, the active stimulation settings can be adjusted in
the Stimulation Control module ( 4 ). This area is intended for
basic adjustments to the stimulation being delivered. It is not
intended for reprogramming.
Controls in this module include:
"Stimulation Control": Change active therapy program.
"Stimulation": Turn stimulation on or off. If stimulation is
turned on, it will come on at the stimulation level shown
below the "Stimulation" button.
"Stimulation Level": Increase or decrease the stimulation
amplitude.
"Reset EPG": Puts the Trial Stimulator in hibernation and
erases all data on the Trial Stimulator.
Note: For more information see the following manual section on
Resetting the Trial Stimulator.
Note: Only 1 program is available for trials using only 1 PNE lead
Additional information can be accessed via the "Therapy
History" ( 5 ) tab on the Patient Device screen. Detailed usage
data is available by pressing the [
Note: The "Threshold Detail" tab is only present for tined lead trials.
] icon ( 6 ).
43