Endress+Hauser ASP Station 2000 Peristaltik Betriebsanleitung Seite 119

ASP station 2000 peristaltic
Endress+Hauser
6.5 Setting the thermostat
6.5.1 General
The thermostat is configured solely via ReadWin 2000. For this purpose, the RS232 interface for the
thermostat (interface B) has to be connected to a serial interface at the PC.
Fig. 59: Thermostat in ReadWin 2000
The screen with the settings for the thermostat is opened by means of the "Thermo" button in the
basic settings.
6.5.2 Settings
Com port
The Com port, which is used to communicate with the thermostat controller, can be set in the
"Interface" section. The same section indicates the status of the connection.
Fig. 60: Com port setting of thermostat (top left in screenshot)
Commissioning
119