Endress+Hauser ASP Station 2000 Peristaltik Betriebsanleitung Seite 106

Commissioning
!
106
6.4.4 Programme selection
Note!
It is only possible to select the switching and event programmes in the 7-programme mode!
Menu structure:
Fig. 42: Programme selection menu structure
Several programme combinations are available for the 7 programme version:
1 A main programme is active.
2 A main programme and a switching programme are active.
1+Event A main programme and the event programme are active.
2+Event A main programme, a switching programme and the event programme are active.
Main programmes
Four main programmes are available. Select a main programme from the item PROG. NR.
( Chap. 6.4.5)
Switching programmes
General
Two programme pairs (1U1 and 2U2) are available. The switching programmes (U1 and U2)
are permanently assigned to the main programmes (1 and 2). A switch from a main programme to
a switching programme can be triggered due to the following criteria:
• Time switch
• Switching based on a measured flow
• Switching by external signal
• Switching based on a parameter of the multi-parameter probe
Several criteria can be defined at a time. There is an OR connection among the defined criteria. In
other words, once a switching criterion is met, the assigned switching programme is executed.
ASP station 2000 peristaltic
Endress+Hauser