Endress+Hauser ASP Station 2000 Peristaltik Betriebsanleitung Seite 112

Commissioning
112
Synchronisation
Menu structure:
Fig. 52: Synchronisation menu structure
You can use synchronisation to assign specific filling times to specific bottles. In this way you could
fill bottle 1 between 00:00 and 02:00 and bottle 2 between 02:00 and 04:00 etc. For this, you have
the following options:
• AUT button: the sampling and bottle change times are not synchronised.
• Synchronisation TIME: sampling starts with the first bottle. The change to the next bottles is
synchronised. For example, a time of 2:00 hours was set for the bottle change. The point 00:00
(= at a full hour) was set for the synchronisation. If the programme is started at 05:20, bottle 1 is
filled. The system then changes to bottle 2 at 06:00.
• Synchronisation TIME+BOT.: each bottle is allocated a specific filling time.
Example: 00:00-02:00: bottle 1; 02:00-04:00: bottle 2; 04:00-06:00: bottle 3, etc.
For example if you start the programme at 10:00, the unit will start filling bottle 6.
6.4.6 Creating switching programmes
Sample mode
Menu structure:
Fig. 53: Sample mode menu structure
In the switching programmes, like in the main programmes, you can trigger sampling by time,
volume, flow or an external signal.
Distribution
You can reserve separate bottles for the switching programmes. The following applies to bottle
distribution:
• The first bottle group of a distribution is reserved for the main programmes.
ASP station 2000 peristaltic
Endress+Hauser