Sending Data (Pc  Handheld Programming Device) - Grasslin Talento Dialog Bedienungsanleitung

13.3 Sending data (PC

The handheld programming device has four storage possibilities:
P 1 = 100 memory spaces
P 2 = 300 memory spaces
P 3 = 300 memory spaces
P 4 = 800 memory spaces
Display on the handheld programming device:
– Program places empty
– Program places occupied
1. In the menu bar, select File Send To

This will open the window "Transmitting timer programs".
 Z
2. In the Reference Time box, select the date and time to be transmitted.
• Activate the System Time box to transmit the current PC date to the
timer.
• Activate the Manual box if you want to enter the date and time
individually.
3. The Summer/Winter Time box can be used to set the changeover from
summertime to wintertime and vice versa.
• Activate Auto if the changeover should be carried out according to
the data predefined by law (CET). It will be recalculated every year.
No change is possible.
• Activate the Manual box if you want to enter the applicable data for
your location/country manually.
• Activate None if you do not want to make a changeover.
140
Handheld programming device)
= P 1, P 2, P 3, P 4
= P _ 1, P _ 2, P _ 3, P _ 4
Handheld programming device

You can decide which contents of the timer program are to be transmitted:
– System Time
– Summer/Winter Time
– Timer programs
2.
3.
4.
5.
6.
Abb. 76: Transmitting timer programs - Handheld programming device 2