Switching State - Grasslin Talento Dialog Bedienungsanleitung

Offset
Offset can be used to offset the ON and OFF switching times of the Astro
program. This is done in order to adapt them to the local conditions.
Example:
Channel 1 CH1 should
• switch OFF only 45 minutes after the calculated sunrise.
Offset = + 00:45
• switch ON already 1 hour and 15 minutes before the calculated sunset.
Offset = - 01:15

Switching state

Here you can set the switching command to be carried out at sunrise or sunset.
Select between the following switching commands:
OFF
The time switch switches OFF at sunrise,
and switches ON at sunset.
ON
The timer switches ON at sunrise,
and switches OFF at sunset.
PULSE The timer switches ON at sunrise and sunset for the set time
(pulse).
Maximum pulse switching time: 1 hour, 59 minutes, 59
seconds.
----
At sunrise, no switching command is carried out.
At sunset, the window for the pulse switching command opens
automatically.
130
Abb. 63: Astro Programs - Offset
Abb. 64: Astro Programs - Switching state