Clearances - Mitsubishi Electric MEHP-iB-G07 Installations, Bedienungs Und Wartungsanleitungen

6 HANDLING AND POSITIONING EN
6.6

Clearances

When installing more than one unit, follow the instructions given in figures 6.5, 6.6 and 6.7.
When installing several units, even on different levels, ensure the minimum clearances as shown in figure 6.4 and the table below.
Units on different levels (mm)
A B C D
1800 600 400 300
Table 10: clearances of units on different levels (mm).
Figure 6.5: clearances of units installed on different levels.
When installing one or more machines close to vertical walls, ensure the clearances between the machines themselves and between the machine and the
wall as shown in Figure 6.5 and in the following table.
92
Installation, use and maintenance manual - Original instructions