Menu Structure - Mitsubishi Electric MEHP-iB-G07 Installations, Bedienungs Und Wartungsanleitungen

9 COMMISSIONING AND ADJUSTMENTS
9.1.2

Menu structure

The tree structures for moving around the various menus are shown below.
Power On
Thermoregulator
The menus are briefly described below:
• The "Unit Menu" displays information such as temperature, pressure and circuit states.
• The 'System Menu' displays information on the management of the system with Multi Manager (if available).
• The "Setpoint Menu" is used to set the setpoints for the various available functions.
Different setpoints can be set depending on the available operating modes (chiller, heat pump and recovery).
It is also possible to set double setpoint values for chiller and heat pump operation
(only if the digital input is fitted and the "double setpoint" function is enabled in the "user menu").
• The "I/O menu" shows the status of the digital inputs and values read from the analogue inputs.
It also shows the status of the digital outputs and the voltage supplied to the analogue outputs.
If expansions are necessary (depending on the configuration parameters), the inputs and outputs of the latter are also shown.
• The "Clock menu", if the clock board is present, is used to set and display the date and time and configure the time bands.
• The list of events recorded by the unit can be viewed in the "Log menu" (only accessible if the clock board is installed).
• The "User menu" is used to display and set parameters relative to user programming of the unit.
• The "Service menu" is used by service engineers to display and set parameters.
• The "Manufacturer menu" is used to display and set unit configuration parameters.
• In the 'Licence Menu', it is possible to display and manage licence-related functions.
Installation, use and maintenance manual - Original instructions
Menu key
Visual. Thermoreg.
Unit menu
selection
System menu
selection
Setpoint menu
selection
I/O menu
selection
Clock menu
selection
Select log menu
Select user menu
Select service
menu
Manufacturer
Menu selection
Licence menu
selection
Table 16: navigation tree used to move around the menus.
Setpoint key Alarm key
Alarm menu
Unit menu
System menu
Setpoint menu
I/O Menu
Clock Menu
Log menu
User password User menu
Service Service menu
Password
Factory Manufacturer
Password menu
Licence menu
EN
Visual. Alarm
Display unit
Display system
Display setpoint
Visual. I/O
Display clock
Log display
Display user
View service
Display
manufacturer
Display licences
118