Installation And Connection Of Room Controls; Method Of Installation - Mitsubishi Electric MEHP-iB-G07 Installations, Bedienungs Und Wartungsanleitungen

9 COMMISSIONING AND ADJUSTMENTS
9.6

Installation and connection of room controls

The various zones can be managed with the following devices:
• Touch screen thermostat (can manage a maximum of one zone).
• Thermostat supplied by a third party (can manage up to two zones).
The following configurations are available:
One zone control, you can choose between:
• Touch screen thermostat.
• Thermostat supplied by a third party.
Two zone control, you can choose between:
• Touch screen thermostat and thermostat supplied by a third party.
• Managing both zones with the thermostat supplied by a third party.

Method of installation

The room control must be positioned in a reference location for temperature control.
Position the room control according to the following instructions:
• 1.5 metres above the floor, in a part of the room that allows the sensor to detect the room temperature as accurately as possible;
• away from cold draughts, solar radiation or other heat sources;
• provide sufficient space at the top of the room control to allow for its installation and eventual removal;
• if removed from its base, the room control is no longer powered and is therefore not functional.
Installation, use and maintenance manual - Original instructions
Figure 9.20: representation of installation and connection spaces.
EN
min.
10 cm
128