Herunterladen Inhalt Inhalt Diese Seite drucken

Environmental Information/Disposal; Packaging; Disposal; Manufacturer's Information Acc. To En 868-8 - KLS Martin group microStop Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
To avoid risks and damage, container stacks should not exceed a height limit of 50 cm. Always use suitable
facilities for transporting and storing the containers, taking care that they cannot topple over or drop down.
Be sure to load the containers only with resterilizable items, thereby observing the product manufacturers'
instructions in each case.
The container is not suitable for sterilizing medicines or biological products.
14

Environmental information/disposal

14.1

Packaging

Gebrüder Martin will take back the full packaging upon request. Whenever possible, parts of the packaging
will be reused.
If this is not an option, the packaging can be disposed of with paper/household waste.
14.2

Disposal

The product was designed to use as few composite materials as possible. This design approach ensures that
it can be recycled to a large degree. This is why we offer to take back the product and to dispose of it
properly. After expiry of the product lifetime, the products must be correctly disposed of or fed into a
recycling system.
15

Manufacturer's Information acc. to EN 868-8

Specification of major components
Checks, maintenance and/or replacements
Container life (sterilization cycles)
Seal life
Cleaning procedures
16

Troubleshooting

Malfunction
Deformation on the bottom of
the container box
38
Section 4.1 "Description of the components", page 30. And
Section 2, "Product Overview", page 28
Section 11 "Maintenance and Repair", page 37 and section 16,
„Troubleshooting", page 38
Acc. to EN 868-8, 4.3
Acc. to EN 868-8, 4.3
Section 5 "Disinfecting, Cleaning and Care", page 32
Cause
Excessive load in container
Incorrect loading of the sterilizer
Excessive pressure gradients of
the sterilizers
microStop® – MiniSet Container System
Troubleshooting
Observe loading height according to
section 5.
Always store heavy containers at the
bottom.
Measure gradient and adjust speed of
pressure change.
Instructions for Use
Revision 04

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis