D) Composite Signal Converter - Reely 450 ARF QC09 Bedienungsanleitung

d) Composite Signal Converter

With a common receiver, a separate control signal is generated for each servo and sent to the respective servo plug
contact at the receiver. The composite signal converter reassembles the different servo impulses and outputs them as
a serial composite signal. Up to 8 channels can be used for formation of the composite signal.
The receiver can be supplied with 5 V/DC by the composite signal converter. No additional voltage supply is required
for use in the „QuadroCopter".
The remote control receiver is connected to the „ST3" connection socket of the composite signal converter „QC07". A
suitable connection cable for this is supplied with the composite signal converter.
The connection socket „ST3" has 10 contacts that are numbered from the right to the left. Contact 10 is on the left,
contact 1 on the right.
The composite signal converter „QC07" has the following connection contacts:
LED2
LED1
R18
TP4
R21
C3
C4
C2
LED1: Green LED indicator
LED2: Red LED indicator
ST3: Connection sockets for the receiver cable
ST2: Connection contacts for the composite signal
ST1: Programming plug for production-related settings
For a detailed description of the different contacts and the connection options, see the following sections.
56
R17
C7
R5 R1 R9 R13
TP3
TP7
TP8
R6
U1
Q1
R2 R10 R14
TP2
TP1
C1
R3 R7 R11 R15
ST2
C6
5
6
ST3
ST1
1
2
Figure 6