Start-Up; Setting Up Device; Connect / Disconnect Power Cord - Heidolph Hei-MIX Reax top Originalbetriebsanleitung

Start Up

Setting up device


➜ Locate the shaker on a stable, horizontal surface.
➜ Clean surface and feet with a damp cloth and ethanol regularly.

Connect / disconnect power cord


Connect power cord
The power cord comes with a three-pole
plug and a recess on the bottom side.
The socket is located on the back side of
the unit.
➜ Connect plug to the socket with the
recess facing down.
➜ Push plug up against socket until
securely attached.
➜ Connect plug to power socket.
Disconnect power cord
➜ Disconnect plug from power socket fi rst.
➜ Than disconnect plug from socket on unit.
Warning:
Risk of slipping device!
As a result of vibrations generated during operation the device might
slide off the table top.
The surface must be smooth and clean and should be properly
leveled.

Start-up

Unit plug
Unit socket
10
Power cord