Start Up; Setting Up Device; Connect/Disconnect Power Cord - Heidolph Vibramax 100 Bedienungsanleitung

Start Up

Setting up device


➜ Locate the shaker on a stable, horizontal surface.
➜ Clean surface and feet with a damp cloth and ethanol regularly.

Connect/disconnect power cord


Connect power cord
The power cord comes with a three-pole
plug and a recess on the bottom side.
The socket is located on the back side of
the unit.
➜ Connect plug to the socket with the
recess facing down.
➜ Push plug up against socket until
securely attached.
➜ Connect plug to power socket.
Disconnect power cord
➜ Disconnect plug from power socket fi rst.
➜ Than disconnect plug from socket on unit.
Warning:
Risk of slipping device!
As a result of vibrations generated during operation the device might
slide off the table top.
The surface must be smooth and clean and should be properly
leveled.
Start Up
Unit plug
Unit socket
11
Power cord