Forcing The Charge; Unlocking The Charging Cable - hager Witty Installationsanleitung

5
To save a new charging mode:
Wait The lighting strip flashes
20 secs.
quickly for 5 seconds depending on
the charging mode selected.
20 secs.

14.2. Forcing the charge

1
Connect the electric vehicle to the
charging station.

14.3. Unlocking the charging cable

If the charging cable is locked on the charging station, you can release it by following the procedure below. The charging
station must be unlocked (key to ON position):
1
Push the plug to the bottom of the
socket in the charging station.
3
The lighting strip flashes green/white. You can remove the charging cable. This procedure can be done several
times in a row.
OR
2
Place your thumb on the hover button for 2 seconds then remove it.
The lighting strip starts to pulse green.
2
Place your thumb on the hover button for approximately 5 seconds
then remove it. You will hear a "click" as it unlocks.
Connect the electric vehicle
to the charging station
2 secs.
approx. 5
secs.
47