Storage Of The System; Placing Out Of Service - WIKA CPH6000 Betriebsanleitung

ProcessCalibrator
CPH6000
4. Make sure that the shipment is marked as transport of a highly sensitive
measuring instrument.

14. Storage of the system

Before the system is stored all remains of any medium stuck to it
must be removed. This is particularly important if the medium is a
health hazard such as a corrosive, toxic, carcinogenic,
radioactive, etc.
The storage place must satisfy the following conditions:
Ambient temperature: 0 to 70 °C (Temperatures above 40 °C can affect the

capacity of the rechargeable battery)
Humidity: 35 to 85 % relative humidity without condensation

Avoid the following influences:
Direct sunlight or vicinity to hot objects

Mechanical vibration

Soot, steam, dust and corrosive gasses

Explosion-hazard environment, inflammable atmosphere

Please follow the following instructions to avoid damage.
1. Wrap the system in antistatic plastic foil.
2. Using the insulating material, place the system in the box in such a way that
there is about the same amount of insulating material on all sides of the
transport box.
3. If the system is stored for a longer time (more than 30 days) add a bag with
desiccant to the box.

15. Placing out of service

Before the system is shipped all remains of any medium stuck to
it must be removed. This is particularly important if the medium is
a health hazard such as a corrosive, toxic, carcinogenic,
radioactive, etc.
When disposing of the system please observe the legal and local
regulations in force. For the final disposal of the system a special firm
qualified for this is to be commissioned.
WIKA Operating Instructions ProcessCalibrator
GB
53