Important Device Settings For Calibrations Using Calibration Mode; Unit And Resolution - WIKA CPH6000 Betriebsanleitung

ProcessCalibrator
CPH6000

5.3 Important device settings for calibrations using calibration mode

GB
Calibration date

The instrument has an integral real-time clock with date. The current date of a
calibration is stated later in the calibration certificate. Before starting a
calibration you must ensure that the internal date of the CPH6000 is correct
(see Chapter 10.5 "SETUP-Additional menu options: CPH-Settings").
Note: After switching on the CPH6000, a brief device status message
appears showing the current settings.
Calibration temperature

On calibration certificates for pressure measuring instruments, the ambient
temperature during the calibration is also always stated along with the calibra-
tion data. Therefore, the current ambient temperature can be entered into the
CPH6000 via its menu so that it can later be included on the calibration certifi-
cate. Before starting a calibration you must ensure that the temperature value
set in the CPH6000 corresponds to the ambient temperature (see Chapter
10.5 "SETUP-Additional menu options: CPH-Settings").
Note: After switching on the CPH6000, a brief device status message
appears showing the current settings.

5.4 Unit and resolution

After selecting one of the Main Menu Items (e.g.: MEASURING, CALIBRATION
or SWITCH TEST) from the "SETUP" menu (press "SETUP" key), using the menu
Option: "Unit", and its associated submenu respectively (move the cursor to "Unit"
and press the right or left arrow), you can select the unit and adjust its resolution
(see Chapter 9: "Operating modes").
20 WIKA Operating Instructions ProcessCalibrator