WIKA CPH6000 Betriebsanleitung Seite 40

ProcessCalibrator
CPH6000
GB
9.3 CALIBRATION mode (Calibration of a pressure transmitter)
1st Test point
(e.g. 0 bar)
Reference ->
Test item ->
Deviation ->
Test item no. & ->
Test point no.
2nd Test point
(e.g. 1 bar)
Reference ->
Test item ->
Deviation ->
Test item no. & ->
Test point no.
2nd Test point
Reference ->
Test item ->
Deviation ->
Test item no. & ->
Test point no.
xth Test point
40
Generate the specified Set-
point acc. to the Reference
(establish a pressure free con-
dition/Atmosphere) and with
<--
ENTER
record the values of this test
point
Generate the specified Setpoint
acc. to the Reference using
the pressure generator
record the values of this test
ENTER
point
(using
previous test point)
WIKA Operating Instructions ProcessCalibrator
returns you to the
BACK