Electrical Connections For A 3-Wire Test Item - WIKA CPH6000 Betriebsanleitung

ProcessCalibrator
CPH6000

4.3 Electrical connections for a 3-wire test item

Before connecting a test item, the instructions in Chapter
4, "Electrical connections to the CPH6000 Digital Console",
should be read and then followed.
Sample connection diagram for checking/
calibrating a WIKA pressure transmitter
(3-wire).
Example with a WIKA pressure transmitter with mA output as the test item:
a) without its own power supply
(24 V must be activated via the Menu;
see Chapter 9.1 - 9.4)
Example with a WIKA pressure transmitter with voltage output as the test item:
a) without its own power supply
(24 V must be activated via the Menu;
see Chapter 9.1 - 9.4)
WIKA Operating Instructions ProcessCalibrator
b) with its own existing power supply
b) with its own existing power supply
GB
17