Electrical Connections To The Cph6000 Digitalconsole; Electrical Connections For A 2-Wire Test Item - WIKA CPH6000 Betriebsanleitung

ProcessCalibrator
CPH6000

4.2 Electrical connections for a 2-wire test item

GB
Sample connection diagram for checking/
calibrating a WIKA pressure transmitter
(2-wire).
Example with a WIKA pressure transmitter with mA output as the test item:
a) without its own power supply
(24 V must be activated via the Menu;
see Chapter 9.1 - 9.4)
16
Before connecting a test item, the instructions in Chapter
4, "Electrical connections to the CPH6000 Digital Console",
should be read and then followed.
b) with its own existing power supply
WIKA Operating Instructions ProcessCalibrator