Specification - WIKA CPH6000 Betriebsanleitung

ProcessCalibrator
CPH6000

16. Specification

GB
Sensors
Pressure range
Over pressure safety
Burst pressure
Pressure range
Over pressure safety
Burst pressure
Type of pressure
Units
Accuracy (measurement chain)
Active temperature compensation °C
Permissible ambient temperature °C
Calibration
CPH6000 Digital Instrument specific details:
Calibration mode
Display
Display definition
Measuring rate (pressure):
Functions
CALIBRATION function:
- Available memory
- Test points / test item
SWITCH TEST function:
Input: voltage**
- Measuring range
- Resolution
- Accuracy
Input: current**
- Measuring range
- Resolution
- Accuracy
Power supply output:
Interface
Power supply
Battery operation
Permissible air humidity
Permissible storage temperature
Housing
Mass
Ingress protection
Protection class
Degree of pollution
CE-conformity
54
1 integral pressure transmitter (interchangeable without tools) 1;
optional: external operation via 1.2 m cable
bar 0.25 0.4 0.6
bar 1.6 2 4
bar 2.4 2.4 4.8
bar 25 40 60
bar 80 80 120
bar 96 96 550
{In addition to the above-specified gauge pressures; Vacuum,
compound range and absolute pressures are available};
{Compound ranges: minimum span 400 mbar, e.g. -200 mbar ... +200 mbar}
15 standard units & one freely-programmable unit; see page 4 Menu
configuration
0.025 % FS*
0 ... 50
0 ... 50
Factory calibration certificate (optional: DKD calibration certificate)
MEASURING / CALIBRATION / SWITCH TEST
Large graphic display for reference & test item signals and additional
information
Up to 6 digits; selectable
Values 2/sec
CALIBRATION-Func., SWITCHTEST-Func. Min-, Max-memory, Tare,
Min-, Max-alarm (visual), filter (rolling average). Offset-correction,
PowerSave-Function
At least 16 test items (dependent on number of test points)
Up to 11 calibration points (up & down)
Determination of switch points and automatic calculation of hysteresis
V 0 ... 1; 0 ... 2; 0 ... 5; 0 ... 10
mV 0.1
mV 0.5
mA 0 ... 20; 4 ... 20
µA 1
µA 1.6
24 V [load: max. 50 mA; min 20 mA] (activated via Menu)
RS-232 & USB
Internal lithium-Ion rechargeable battery (charging time: < 6 h;
alternative: mains supply via charger)
h Approx. 8
% r.h. 0 ... 85 (relative humidity without moisture condensation; at 50 °C)
°C 0 ... 40
Impact-resistant ABS, membrane keyboard, transparent panels
g Approx. 850
IP54 (with protective caps fitted) else IP20
3
3
Interference emission and immunity to EN 61 326, declaration of
conformity on request
WIKA Operating Instructions ProcessCalibrator
1 1.6 2.5 4
5 10 10 17
6 12 12 20.5
100 160 250 400
200 320 500 800
800 1000 1200 1700 2400 3000
6 10 16
35 35 80
40 42 96
600 1000
1200 1500