Operating The Calibrator; Setting A Temporary Set Temperature (Set-Point Mode); Programming (Main Menu); Short Description Of The Menu - WIKA CTD4000 Betriebsanleitung

7. Operating the calibrator

7. Operating the calibrator
7.1 Setting a temporary set temperature (set-point
mode)
Setting the set temperature:
Pressing the [▲] button increases the set point.
■
Pressing the [▼] button lowers the set point.
■
EN
The button [E] confirms the entry.
■
Before each calibration, you must wait until a stable set point
is reached.

7.2 Programming (main menu)

All the settings can be carried out in this menu structure.
1. Press button [F].
⇒
This opens the main menu.
2. With the button [F] select the desired entry in the main
menu (see overview).
3. Confirm the entry with the [E] button.
16

7.3 Short description of the menu

The calibrator has four menu levels:

First menu level: General settings

■

Second menu level: Settings for optimising the control

■

Third menu level: Recalibration of the instrument

■

Fourth menu level: Settings of the temperature controller

■
WIKA operating instructions, model CTD4000