Checchi & Magli DUAL 12 COMPACT Bedienungs- Und Wartungsanleitung Seite 74

Adjusting the opening of the cup
F
E
F
UN41-0496MM
Depending on the type of seedlings and on the rotation
speed, when the seedlings go down the dispenser they
may knock the side of the opening of the drop pipe and
fall in way which is not perpendicular.
The cam (A) adjusts the opening to the cup so that the
seedling is in the centre of the drop pipe (C).
The cam (B) adjusts the opening to the cup so that the
seedling is in the centre of the drop pipe (D).
For adjustments, proceed as outlined below.
1) Loosen the screws (E) and use the cam (A).
- Rotate the cam in direction (1) to make the cup open
earlier inside the drop pipe (C).
- Rotate the cam in direction (2) to make the cup open
later inside the drop pipe (C).
Adjusting the planting unit load
D
UN41-0497MM
English language
ADJUSTMENT INFORMATION
1
D
E
2) Once the adjustment is complete, tighten the screws
3) Loosen the screws (F) and use the cam (B).
-
-
4) Once the adjustment is complete, tighten the screws
Do not loosen the screws (G) as this would change
the brake position or the cam height.
F
24
2
1
2
C
(E).
Rotate the cam in direction (1) to make the cup open
earlier inside the drop pipe (D).
Rotate the cam in direction (2) to make the cup open
later inside the drop pipe (D).
(F).
NOTICE
C A
A1
5
B
G
A
G
E
A2
B
Use and maintenance