Checchi & Magli DUAL 12 COMPACT Bedienungs- Und Wartungsanleitung Seite 69

Changing the dual row spacing range
25 - 26
UN41-0493MM
To change the dual row spacing range from 25 ÷ 26 to 27 ÷
30 and vice versa, proceed as outlined.
1) Unscrew the screws (A).
2) Remove the casing (B).
3) Remove the casing (C).
4) Unscrew the nut (D).
5) Remove the screw (E).
6) Place the tie-rod (F) as shown in illustration (1) to
select dual row spacing range 25 ÷ 26.
Place the tie-rod (F) as shown in illustration (2) to
select dual row spacing range 27 ÷ 30.
English language
ADJUSTMENT INFORMATION
1
F
D E
C
19
27 - 28 - 29 - 30
7) Insert the screw (E).
8) Tighten the nut (D).
9) Position the casing (C).
10) Position the casing (B).
11) Tighten the screws (A).
- Depending on the range chosen, adjust the dual rows
as required (see "Adjusting the dual row from 25 to 26
and vice versa" and "Adjusting the dual row within the
27 to 30 range and vice versa".
5
2
F
E D
A
B
Use and maintenance