Introduction; Product Description - GF MSA 4.0 Bedienungsanleitung

Introduction

1 Introduction
Dear Customer,
Thank you for choosing this product. The electrofusion units MSA 4.0 /MSA 4.1 are designed
according to the current technology standards. Using them for purposes other than those
described in this manual may cause injury to the operator or to others. It may also cause
damage of the machine or other equipments.
Therefore:
 The machine should only be used when in perfect working status.
 Always follow the safety instructions.
 The technical documentation should be kept in the proximity of the machine. Anyway,
the manufacturer reserves the right to make the technical changes to such machines
which may result in differences from the illustrations and information contained in this
manual.
1.1

Product Description

The MSA 4.0 (MSA 4.1) is an electrofusion control unit for the electrofusion jointing of PE/PP
pipes.
Fusion parameters input can be accomplished with a fusion barcode according to ISO/TR
13950 standard or manually.
The internal processors control the values of welding parameters, set the power output
accordingly and, thanks to the messages shown in the LCD display, guides the operator to
successfully execute all the necessary operations.
In addition, the MSA 4.0 (MSA 4.1) is tracking and storing in the internal memory up to 5000
welding protocols.
The welding protocols can be transferred to a PC via USB memory stick, in PDF, CSV and BIN
formats for welding certificates preparation.
To ensure high quality fusion cycles, depending on the ambient temperature, the machine
is adjusting automatically the welding time, for the correct distribution of the energy to the
fitting.
Operating manual MSA 4
1