Introduction; Product Description - GF MSA 330 Bedienungsanleitung

1 Introduction

2
1 Introduction
Dear Customer,
Thank you for choosing this product. The electrofusion units MSA 330 and
MSA 340 are designed according to the current technology standards.
Using them for purposes other than those described in this manual may
cause injury to the operator or to others. It may also cause damage of
the machine or other equipments.
Therefore:
•
The machine should only be used when in perfect working status.
• Always follow the safety instructions.
•
The technical documentation should be kept in the proximity of the
machine. Anyway, the manufacturer reserves the right to make the
technical changes to MSA 330 (MSA 340)
differences from the illustrations and information contained in this
manual.
1.1

Product Description

The MSA 330 (MSA 340)
electrofusion jointing of PE pipes.
Fusion parameters input can be accomplished with a fusion barcode
according to ISO/TR 13950 standard or manually.
The internal microprocessor controls the values of welding parameters,
set the power output accordingly and, thanks to the messages shown in
the LCD display, guides the operator to successfully execute all the
necessary operations.
In addition, the MSA 330/340
memory up 1000 welding protocols, that can be transferred to a PC via
USB memory stick, either in PDF or CSV formats for welding certificates
preparation.
To ensure high quality fusion cycles, depending on the ambient
temperature, the machine is adjusting automatically the welding time,
for the correct distribution of the energy to the fitting.
Operating Manual MSA 330 / MSA 340
is an electrofusion control unit for the
is tracking and storing in the internal
which may result in