Scheppach Molda 7.0 Dokumentation Seite 27

Documentation
Manufacturer:
Scheppach Maschinenfabrik Gmbh & Co. KG
Günzburger Strasse 69
D - 89335 Ichenhausen / Germany
Dear Customer,
We wish you much pleasure and success with your new SCHEPPACH machine.
NOTE:
In accordance with valid product liability laws, the manufacturer of this machine shall not be responsible for
damage to and from this machine resulting from:
• Improper care.
• Noncompliance with the operating instructions.
• Repairs made by unauthorized persons.
• The installation and use of any parts which are "not original spare parts".
• Improper use and application.
Failure of the electrical system as a result of noncompliance with the legal and applicable electrical directives
and VDE regulations 0100, DIN 57113 / VDE 0113.
We recommend:
Before putting the machine into operation, please read through the entire operating instructions.
These operating instructions are to assist you in getting to know your machine and utilize its proper applica-
tions.
The operating instructions contain important notes on how you work with the machine safely, expertly, and
economically, and how you can avoid hazards, save repair costs, reduce downtime and increase the reliability
and service life of the machine.
In addition to the safety requirements contained in these operating instructions, you must be careful to ob-
serve your country's applicable regulations.
The operating instructions must always be near the machine. Put them in a plastic folder to protect them from
dirt and humidity. They must be read by every operator before beginning work, and observed conscienciously.
Only persons who have been trained in the use of the machine and have been informed of the various dan-
gers may work with the machine. The required minimum age must be observed.
In addition to the safety requirements contained in these operating instructions and your country's applicable
regulations, you should observe the generally recognized technical rules concerning the operation of wood-
working machines.
Page 28 1902104852